The CLR4000 is a 4 channel remote keyfob that can copy any 433Mhz fixed code remote with 10 DIP switches or fixed code remotes such as the TOP432S and TOP432NA.
These cloning remotes can only copy 433Mhz DIP switch remote controls. To check your key fob open up the case to see if it has 10 DIP switches as shown below.
The CLR4000 can asign upto 4 different channels to the 4 buttons. i.e. upto 4 garage door or gate receivers.
This replacement remote is notcompatible with rolling code or code hopping technologies.
Operating Distance: upto 80m
Batteries Included.
If you don't see the remote control you are looking for, Call For Advice. COPYS THE MOST POPULAR REMOTES FROM CAME, NICE and DEA
Brushed Metal Casing
Plastic Button Protector
Simple 4 Step Programming Instructions
1. Clear memory and prepare for programming - Hold down buttons 1 and 2 until the blue LED fashes - this takes around 20 seconds.
2. Place the original and the clone remote close together.
3. Press the button to be programmed on both remotes and hold until LED fashes steadily on the clone remote.
4. Programming is complete - Repeat steps 2-4 to program extra buttons.
The CLR4000 will copy all of the following remote controls: